What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 07:57
A circuit breaker is similar, but is resettable.
These devices are installed between the “hot” and “neutral” and protective ground.
There are three different concepts here that are getting confused.
(Dc diagram shown, AC is similar).
[old diagram got deleted by accident]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At one ohm, the resistor has a maximum of 1 watt power.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
a photo is worth a thousand words.
Samsung is giving these Galaxy phones a big One UI upgrade - here's which models qualify - ZDNET
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
For this case there are devices called Metal oxide varistors (MOV).
There are two important concepts here.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–16 [ OO OLAOYE OYEBODE ]
Study Links Gut Bacteria to MS Risk and Reveals Key Triggers - Neuroscience News
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
One is “what exactly is in a ‘surge protector’ ? ”
This is where this question deviates from being a 'generic' question, and becomes more specific.
Amazon reveals best books of the year so far: Suzanne Collins, S. A. Cosby make the list - USA Today
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is 'the assistant's answer'
One
What are some things that children used to wait for, but are no longer common in today's society?
He then asserts :
At least they know the answer if they wanted it.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Japanese queue for hours as rice shortage deepens - Financial Times
An AC voltage/ current source, and an ac inductive load.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
I've never read the book. What did Dorian Grey do that was so immoral and sinful?
The MOV will conduct when the voltage exceeds 50% of line voltage.
nine
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It seems Mohan does not understand the difference between a comment and an Answer.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
but I think this circuit , shows a few more pieces.
what exactly is a ‘surge’ protector?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Tender Moment Nurse Mare Adopts Orphaned Foal As Her Own Has Us in Tears - Yahoo
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
I post the exact comment here.
Because the load is inductive, the current lags the voltage.(by a bit).
Here is a simplified AC power diagram.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Barnstars:
[image of Common-mode choke]
But it can get overloaded, and no longer works.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The other is “what does a “fuse” do?”
These are simplified answers to the original question, and does not change anything I wrote above.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
He then describes Rainy Season and Lightning.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But… the neutral is now “floating” because of the 1 ohm resistance.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Now when you have a certain ac resistance, then a current flows in a loop.
the problem then depends on "how fast does the fuse operate?".
Upvotes:
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
so, what happens?
Edit 2024–10.
What is lightning?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
eight
This device then solves the entire problem.
2024–10–10[John johnson John Johnson ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is where the MOV conducts again, and dissipated the energy.
He then describes the function of a fuse.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The bolt then partially travels down the line to your home.
2024–10–14 [Omar Gharbi Omar Gharbi ]
but this device (an Inductor) … impedes the rapid changes in the current.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
A fuse is a non-resetable over current circuit protector.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What does a fuse do?
This one hit behind the barn.
First Sentence:
It also is a device that limits the change in current flow.
The third is lightning and “how it gets conducted into a home.”
In schematic diagrams this is the symbol for a fuse: